12 Dismounting and disposal
12.1 Dismounting PIOX R721
2021-09-01, UMPIOX_F72xV1-3EN
64
12.1 Dismounting
The dismounting is carried out in reverse order to the installation.
12.2 Disposal
The measuring equipment has to be disposed of in accordance with the applicable regulations.
Caution!
Warning of severe injuries caused by leakage of dangerous fluids
The contact to the fluid may result in personal or material damage or dangerous situations. The
disassembly must be carried out while the pipe is empty and pressureless.
→ After dismounting the sensor, the pipe has to be tightly sealed with a specified blind plug.
Important!
Avoiding environmental damage by correct disposal of components
Depending on the material, the corresponding parts have to be disposed of in residual or special waste or recycled.
FLEXIM accepts the return of the components. For further information, contact FLEXIM.
To Next Page
Loading...
Need help?
General
