FlexRadio FLEX-6000 Signature Series User Manual

FLEX-6000 Signature Series – Maestro User Guide
Page 155
Copyright 2019 FlexRadio Systems. All Rights Reserved.
32.3.9 Auxiliary Meters
A set of auxiliary meters can be displayed on the Maestro display by tapping the Meters button at
the bottom right corner of the display. When two panadapters are displayed, the button is found at
the right side of the display between the panadapters.
When the meters are displayed, the panadapter(s) are made narrower and move to the left side of
the display; the meters are displayed on the right. “Plus” and “minus” buttons are displayed below
the meters. Tapping the “plus” button adds a meter, tapping a “minus” button removes a meter.
The value displayed in each meter can be selected by tapping on the meter. A selection of values is
available that depends on the equipment connected to the radio.

FlexRadio FLEX-6000 Signature Series Specifications

General

Brand	FlexRadio
Model	FLEX-6000 Signature Series
Category	Control Unit
Language	English