FLEX-6000 Signature Series – Maestro User Guide
Page 78
Copyright 2019 FlexRadio Systems. All Rights Reserved.
The Transmit Equalizer control panel is found on the Transmit tab of the Main Menu as shown above.
When enabled, the graphic equalizer can be optimized for different microphones and operating
styles such as DX, contesting and SSB. The sliders provide a +/- 10 dB adjustment range over eight
octaves. The settings shown above provide very good audio quality for many dynamic microphones.
In a similar fashion, the Receive Equalizer is found on the Audio tab of the Main Menu as shown
above. When enabled, the graphic equalizer can be optimized for different listening conditions and
operating styles. The sliders provide a +/- 10 dB adjustment range over eight octaves.
17.4.4 How to Configure VOX
The VOX controls are found in the TX Menu. Tap the VOX button to enable voice operated transmit
operation and adjust the VOX gain slider to adjust the VOX sensitivity. Sensitivity should be adjusted
to the minimum that allows reliable keying by the voice without keying from other room noises. VOX
Delay sets the hang time before the transmitter unkeys after you stop speaking. The delay should
be set to be comfortable for the style of operation desired. See section 17.4.7, DAX TX Channel and
Microphone Interaction for details concerning the interaction of VOX and the DAX TX channel.
17.4.5 Monitor Mode Operation
The Monitor controls are found in the TX Menu. Monitor mode is enabled by tapping the MON
button. The monitor level may be controlled by the adjacent slider.
To Next Page
Loading...
Need help?
General
