FlexRadio FLEX-6000 Signature Series User Manual

FLEX-6000 Signature Series – Maestro User Guide
Page 9
Copyright 2019 FlexRadio Systems. All Rights Reserved.
4.4.2 Powered Speaker (PWR SPKR) Connector
The PWR SPKR connector accepts a 1/8-inch (3.5mm) stereo (TRS) plug and provides stereo line level
output for amplified PC speakers. CAUTION: Do not use a mono (TS) plug as this will short-circuit
the right channel signal to ground.
4.4.3 Line Out Connector
The LINE OUT connector accepts a 1/8-inch (3.5mm) stereo (TRS) plug and provides stereo consumer
(-10 dBV) line level output. CAUTION: Do not use a mono (TS) plug as this will short-circuit the right
channel to ground.
4.4.4 Phones Connector
The PHONES connector accepts headphones with a standard 1/8-inch (3.5mm) stereo (TRS) plug.
Recommended ratings for headphones are 25mW into 16-ohm load or 13mW into a 32-ohm load.
CAUTION: Do not use a mono (TS) plug as this will short-circuit the right channel signal to ground.

FlexRadio FLEX-6000 Signature Series Specifications

General

Brand	FlexRadio
Model	FLEX-6000 Signature Series
Category	Control Unit
Language	English