Flintec FT-107 - Stbl: 0.5 ] Stability Delay; Motd: 1 ] Motion Detection

FT-107 Weighing Terminal, Technical Manual, Rev. 1.0.0, August 2019 Page 39 of 46
7.4.6 [ StbL: 0.5 ] Stability Delay
If the scale is stabile during this time zeroing, taring, printing etc. functions can be proceeded. The
stability time can be entered between 0,4 and 9,9 seconds.
Press ▲ key to change the value. Press Enter key to enter the next item or press
Esc key to return to the main block.
7.4.7 [ Motd: 1 ] Motion Detection
This parameter sets the stability range as;
O
± 0.5 e
1
± 1 e
2
± 2 e
3
Disable
Press ▲ key to change the value. Press Enter key to enter the next item or press
Esc key to return to the main block.