M400 Web Browser Interface
432-0012-00-12 Version 110 July 2016 21
View Camera and JCU II IP Address
Connect the camera and JCU II together through the switch and power on both the camera and
the switch. (The JCU II is a PoE device getting power from the switch.)
On the JCU II, press and hold the COLOR button while pushing the joystick forward. The IP
address of the JCU II and then camera are shown for 3 seconds on the LCD display.
The PC or laptop must be on the same network as the camera and JCU II. For example: for a
camera IP address of 192.168.250.116, set the network adapter to a compatible IP address such
as 192.168.250.1 with a netmask of 255.255.255.0. See “Enabling Universal Plug and Play
(UPnP)” on page 40 for another method of finding the camera on the network.
Camera Web Server Login Accounts
It is possible to log in to the camera using one of three User Names: user, expert, or admin. By
default, the passwords are: user, expert, and fliradmin, respectively. The user login can access
the Live Video page and control the camera. The expert login can access the Setup menus and
make configuration changes to the payloads and other components. The admin login can access
the Maintenance menu and all the other menus as well as change the login passwords. The
default login passwords should be changed to prevent unauthorized log in. Refer to “Maintenance-
>Server->Security Options” on page 32.
Note: Only two web sessions can be active at once.
Log in to the Camera Web Server
1. Open a web browser and enter the camera IP address.
The login screen with a picture of the camera will appear.
2. Select a different language if desired.
3. Enter admin for User Name and fliradmin for Password, then click Log in.
To Next Page
Loading...
Need help?
General
