Page 30 CWT Compact Touch Installation and Maintenanace Manual Issue 13
1. Display module
2. Warning/Error Indicator
3. Wake Up Button
Warning/error indicator
The warning/error indicator can light with either red or yellow color.
RED = Error
YELLOW = Warning
The slot for the warning indicator also support the ambient light sensor
Wake Up button
When in sleep mode the display is dark. This button wakes the terminal and will
display the default panel.
4.4 Data communication
4.4.1 Cale WebOffice 2 (CWO 2)
Cale WebOffice 2 is a back-office service for remote management of your
terminals and for financial and statistical purposes. The CWT Compact
communicates with CWO 2 via GSM/GPRS, 3G or LAN using the TCP/IP
protocol.
4.4.2 Transaction processing
Purchase data can be stored in a non-volatile memory device inside the CWT
Compact, but in some card payment applications the data is immediately
transferred to an external source, such as CWO, without being stored anywhere
inside the terminal.
Coins must be collected on site by emptying or replacing the coin box.
Collection of card purchases can be done either on site by means of a memory
device such as a USB stick, or the data can be transferred automatically to the
CWO database on a regular basis where the operator can process the data in
several ways.
4.5 Bar code Scanner
The bar code scanner can read 1 dimensional and 2 dimensional (matrix) bar
codes.
This scanner is only available in the CWT Touch version and is located below the
Wake up button.
To Next Page
Loading...