ROTADISK Pneumatic Actuator RD & RDF
Operating Manual ā BA3002 EN
Page 8 of 79
Figure 1: Components of the ROTADISK Pneumatic Actuators RD & RDF
transmission shaft (signal device side)
threaded fastening holes for signal devices (M5 x 7)
control air connection OPEN
control air connection CLOSED
connection to fittings according to DIN ISO 5211
transmission shaft (fittings side)
hexagon socket head screws for fastening the lid
threaded pin/end stop for end position setting
(only in OPEN position is standard design, not in RD/F 2.5)