To avoid personal injury and/or material damage, make sure that the goods
are examined and unpacked only by qualified personnel with suitable personal
protective equipment (PPE) and suitable tools.
See chapter 2 Safety Information.
4.2 Examining Received Goods
1. Check the ROTADISK Pneumatic Actuator against the delivery note for
completeness immediately upon receiving the goods.
A delivery note is enclosed with every delivery.
The information on the nameplate of the ROTADISK Pneumatic Actuator serves for clear
identification and must match the information on the delivery note.
2. Check the ROTADISK Pneumatic Actuator for transport damage.
3. Report any defects and/or material damages immediately to the carrier and
Flowserve Flow Control GmbH.
Flowserve Flow Control GmbH must receive all claims in writing within one month of
receipt of the ROTADISK Pneumatic Actuator.
Please note that Flowserve Flow Control GmbH will be unable to accept later claims.
✓ Examination of the received goods is completed.