ROTADISK Pneumatic Actuator RD & RDF
Operating Manual – BA3002 EN
13 Disposal and Recycling
Page 72 of 79
13 Disposal and Recycling
13.1 Safety Information
To avoid personal injury and/or material damage, make sure that disposal and
recycling work is performed only by qualified personnel with suitable personal
protective equipment (PPE) and suitable tools.
See chapter 2 Safety Information.
13.2 Disposing of and Recycling the ROTADISK Pneumatic Actuator
At the end of the service life of the ROTADISK Pneumatic Actuator, all relevant materials and
parts must be recycled or disposed of in compliance with local environment laws and
regulations. If the ROTADISK Pneumatic Actuator contains hazardous substances or toxic
fluid residues which are harmful to health and the environment, the ROTADISK Pneumatic
Actuators must be disassembled and disposed of in accordance with local/regional
disposal regulations and laws.
The safety data sheet of hazardous substances or toxic fluid residues contains
important information on disposal and recycling.
The ROTADISK Pneumatic Actuator
▪
is shut down.
▪
is disconnected/dismantled from the valve (e.g. ball valve).
▪
is not under pressure.
▪
Is decontaminated (free from hazardous substances or toxic fluid residues).
The two lids of the ROTADISK Pneumatic Actuator RDF are removed
( see section 8.3.1).
1. Hand over the ROTADISK Pneumatic Actuator to an authorised disposal or
recycling company.
An authorised disposal or recycling company will process the disposal or recycling of
the ROTADISK Pneumatic Actuator.
✓ Disposal or recycling is completed.
To Next Page
Loading...
Need help?
General
