Flowserve ROTADISK RD User Manual

ROTADISK Pneumatic Actuator RD & RDF
Operating Manual – BA3002 EN
4 Receipt of Goods
Page 36 of 79
4.3 Unpacking the ROTADISK Pneumatic Actuator
1. Open the box or wooden crate.
2. Loosen and remove the entire packing and load securing material (for example,
wedges).
3. Lift the ROTADISK Pneumatic Actuator out of the box and/or wooden crate (
see chapter 12 Transport).
In case of a heavy ROTADISK Pneumatic Actuator (≥ 15 kg), the ROTADISK Pneumatic
Actuator must be lifted out of the box or wooden crate with lifting gear and straps (
see chapter 12 Transport).
4. Break up the box and/or wooden crate.
5. Dispose of boxes and/or wooden crates, pallets, support frames, skeleton boxes
and all packing and load securing materials that are no longer needed (see also
section 13.2 for disposal).
6. Transport the ROTADISK Pneumatic Actuator carefully to the application site (
see the chapter 12 Transport).
✓ Unpacking of the ROTADISK Pneumatic Actuators is completed.

Flowserve ROTADISK RD Specifications

General

Brand	Flowserve
Model	ROTADISK RD
Category	Controller
Language	English