ROTADISK Pneumatic Actuator RD & RDF
Operating Manual – BA3002 EN
8 Repair
Page 43 of 79
8 Repair
8.1 Safety Information
To avoid personal injury and/or material damage, make sure that repair work is
performed only by qualified personnel with suitable personal protective
equipment (PPE) and suitable tools.
See chapter 2 Safety Information.
Danger of injury due to improper repair work on the ROTADISK
Pneumatic Actuator!
Improper repair work on the ROTADISK Pneumatic Actuator can lead to
severe injury or even death.
Do not carry out repair work on a ROTADISK Pneumatic Actuator
when it is in operation and/or under pressure.
Do not carry out repair work on ROTADISK Pneumatic Actuators
without consultation and support by Flowserve Flow Control GmbH.
Do not unscrew the lid of the ROTADISK Pneumatic Actuator RDF
without the disassembly device (the lids are under high spring
tension!).
Contact service teams of Flowserve Flow Control GmbH or the
Flowserve Quick Response Centers if repair work needs to be carried
out.
Danger of injury due to high spring tension!
A lid under spring tension can cause severe injury or even death if you
remove it without an assembly device with press.
Do not loosen/unscrew lid screws without an assembly device with
press.
Contact Flowserve Flow Control GmbH if no assembly device with
press is available.