To avoid personal injury and/or material damage, make sure that maintenance
work is performed only by qualified personnel with suitable personal protective
equipment (PPE) and suitable tools.
See chapter 2 Safety Information.
7.2 Required Spare Parts for Maintenance
Under particularly harsh operating conditions, the sealing elements of the ROTADISK
Pneumatic Actuator can begin to show signs of wear after a certain time. Moreover, very
critical or extreme operating conditions may necessitate periodic replacement of the
ROTADISK Pneumatic Actuator components.
Suitable spare parts are required for maintenance work. Flowserve Flow Control
GmbH offers repair sets or spare parts kits for every ROTADISK Pneumatic Actuator.
In order for Flowserve Flow Control GmbH to be able to offer suitable repair sets and
spare parts kits for the ROTADISK Pneumatic Actuator, the ROTADISK Pneumatic
Actuator must be clearly identified.
This technical identification is provided either by a reference to the customer order
documents (e.g. delivery note or invoice) or by the data on the nameplate.
To Next Page
Loading...
