1672/1673 FC/1674 FC
Users Manual
10
Item Function Description
E
O
Opens the Device Settings menu.
F
N
Save the measurement. While measurement is in process, this
button is inactive. See Quick Save.
G
C
1673 FC/1674 FC: Turn on the radio for Fluke Connect. Blinks in
5 s intervals when FC device is connected.
Press for >1 s to turn off the radio.
H
T
Start the measurement test.
I
W
Voltage warning. If the PE voltage is >100 V, the W symbol
illuminates if you push
T, the PE annunciator in the display is
lit, and the beeper sounds. The Tester inhibits the RCD and
Loop tests. Not valid for phase rotation measurements.
Note
The voltage warning is inactive for phase rotation tests
on three-phase systems or tests on Isolated Terra (IT)
networks.
Table 5. Rotary Dial and Pushbuttons (cont.)
To Next Page
