Fluke 1672 - Project; Distribution Board; Circuits; Test Points

1672/1673 FC/1674 FC
Users Manual
62
Project
To add project information:
1. Select Site.
2. Enter project code and name.
3. Select Accept.
Distribution Board
To add distribution board information:
1. Select Project.
2. Select Add+.
3. Enter Distribution Board information. DB code, Name, and mandatory fields (*).
4. Select Accept.
Circuits
To add circuit information:
1. Select Distribution Board.
2. Select Add+.
3. Enter Circuit information. Circuit code and Name are mandatory fields (*).
4. Select Accept.
Test Points
To add test point information:
1. Select Circuit.
2. Select Add+.
3. Enter Te s t Po i n t information. Test Point code and Name are mandatory fields (*).
4. Select Accept.
5. Select Save project.
Note
After you enter all the installation information, you must select Save Project.