1672/1673 FC/1674 FC
Users Manual
16
System Settings
The System Settings menu has options for how to set up the Tester with the preferences that
best fit your work environment. The first time you turn on the Tester, the System Settings
menu opens to let you set up the language, region, and date/time format.
Memory Management
To m a n a g e t h e Te s t e r m e m o r y :
1. Press
O to open the Main Menu.
2. Go to Device Settings > System Settings > Memory Management.
The Tester shows a list of options:
Remove all projects
Remove all clients
Remove all custom autotests
Factory Reset
Date/Time Format
The date and time is user-adjustable on the Tester. Before first use, set the date and time on
the Tester. The date and time remains set when power is turned off or the battery is replaced. If
battery is removed, you may need to reset the date and time.
The date format options include MM/DD/YYYY, DD/MM/YYYY, and YYYY/MM/DD. The time
format is set as either 12-hour or 24-hour format.
To s e t :
1. Open the Device Settings Menu:
2. Highlight and select System Settings.
3. Highlight and select Date and Time.
4. Tap on an option to select.
5. Tap on the arrow buttons to change a field.
6. When all changes are done, push the center of the rotary dial to update and exit the menu.
To Next Page
