Multifunction Tester
Device Settings Menu
21
Measurement Frequency (Loop)
Select between 0 Hz and 128 Hz.
Auto Start RCD
Auto Start enables the test to automatically start for RCD Trip/Time and Loop Impedances
modes. When a sufficiently high voltage is detected, the test automatically starts. The default
setting is off.
Info
System Info
The System Info menu is where you find details about the Tester.
1. Select System Info.
The menu shows:
Device Model
Device serial number
OS version
UI version
Libqueeg version
MSP version
Calibration date
Calibration due
Registration with QR Code
Ranges and Uncertainties
For quick reference, the Operating Ranges and Uncertainties for standard EN 61557 are
stored in the Tester. Highlight and select this option to view the limit values of the standard on
the display.
Licenses
Information about the software licenses are stored in the Tester.
1. Swipe up and down on the display to view the details.
2. Tap
2 to exit the menu.
To Next Page
