Fluke 45 Service Manual

45
Service Manual
7-14
qb38c.eps
Figure 7-7. Test Points and Adjustments
7-20. Additional Tests
The Low Battery Indicator Detector/Low Battery Disconnect Test and the Cycle/Float
Charge Switch Test described earlier under Performance Testing can also be used as
fault isolation aids in troubleshooting the Battery Pack Option.
7-21. Schematic Diagram
The schematic diagram for the Battery Pack Option is included in Chapter 9 of this
manual.
7-22. List of Replaceable Parts
Figures 7-8 and 7-9 provide illustration for parts list in Tables 7-2 and 7-3, respectively.
Refer to Chapter 6 for parts ordering information.

Fluke 45 Specifications

General

Diode Test	Yes
Display Digits	5 digits
Interface	RS-232
Frequency Range	5Hz to 500kHz
Continuity	< 25 Ω
Basic DC Accuracy	0.05%
Power Supply	115/230 V AC, 50/60 Hz