Fluke 9100 - Section 5 Using the Model 9100 - Procedure Mode

Section 5: Using the Model 9100 — Procedure Mode: About Section 5 5.1-1
Final Width = 215mm
5.1 About Section 5
Section 5 Using the Model 9100 — Procedure Mode
Section 3 should have given you practice at manipulating the front-panel controls. In
Section 5 we shall guide you, in a general way, through the phases of using a procedure
card in the 9100, to calibrate a manually-operated measuring instrument (UUT). For a
guide to using front panel controls in Manual Mode, please turn to Section 4.
Section 5 is divided into the following sub-sections:
5.1 About Section 5 (this sub-section).
5.2 Safety and General Notes.
5.3 Access Guide.
5.4 Adjustment Only Procedure.
5.5 1 Year Verification Procedure.
5.6 Verify Pass/Fail Procedure.