Fluke 9100 - 5.3 Procedure Mode - Access Guide

Section 5: Using the Model 9100: Procedure Mode 5.3-1
Final Width = 215mm
5.3 Procedure Mode — Access Guide
5.3.1 Introduction
Sub-section 5.3 is a guide to access to Procedure Mode. The following topics are covered:
5.3.2 Mode Selection.
5.3.2.1 'Mode' Key.
5.3.2.2 'Mode Selection' Display.
5.3.3 Selection of Procedure Mode —
Entry Menus Common to All Procedures.
5.3.3.1 PROC Key.
5.3.3.2 Procedure Mode Display at Entry.
5.3.3.3 Is Your Name on the List?.
5.3.3.4 Select and Insert the Procedure Card which contains the
Procedure for the Subject UUT Model.
5.3.3.5 Select the Subject UUT Manufacturer.
5.3.3.6 Select the Subject UUT Model.
5.3.3.7 Enter the Serial Number of the Subject UUT.
5.3.3.8 Select the Procedure for the Subject UUT Model.
5.3.3.9 Procedures — Card-Based Operating Instructions.
5.3.3.10 'ABORT'.
5.3.3.11 'END'.
5.3.3.12 User Options Following 'ABORT' or 'END'.
5.3.3.13 Common Operations in Procedure Mode —
Summary of Actions.