Section 5: Using the Model 9100: Procedure Mode 5.5-5
Final Width = 215mm
5.5.3.5 'ENABLE CURSORS' Key
Refer to paras 5.5.4.
5.5.3.6 'REPEAT PREV.' Key
The effect of pressing the 'REPEAT PREV.' (repeat previous) screen key, on the first
'Prompt' screen of a test point, is to force the procedure back to the first screen for the test
point immediately preceding the current point.
On any screen other than the first, pressing the 'REPEAT PREV.' key will return to the
first screen of the current test point.
5.5.3.7 'ABORT' Key and End of Procedure
The effects of: (a) pressing the 'ABORT' screen key; or: (b) arriving at the end of the card
procedure; are described in sub-section 5.3, paras 5.3.3.9 to 5.3.3.13.
To Next Page
Loading...
