12
Electrical Safety
The machine comes in 2 models, 110V and 220V. Do
not use a power source other than the AC rated voltage.
If in doubt, contact FLUX Support. (110V: 100 - 127V /
220V: 200 - 240V)
Make sure that the grounding pin is properly plugged-
in. If not grounded properly, static electricity might be
generated to affect the performance and even increase
the risk of electric shock.
Do not continue to use the power cord if it is found to
be damaged.
When maintaining or disassembling the machine with
the consent of FLUX Support, be sure to turn off the pow-
er and unplug the unit.
Fire Safety
Do not put anything inside the machine that is not la-
ser-compatible. Learn more about laser-compatible mate-
rials (p.41).
Do not stack materials; for example attempting to cut
two or more sheets of material at a time.
To Next Page
Loading...
Need help?
General
