13
Clean out leftover bits inside the unit when it builds
up.
Never leave the unit unattended while operating
always stay within sight. Look inside frequently.
If there is a lasting ame inside the unit that does not
extinguish when the laser has moved past. Turn off the
machine and pull the plug on the back of the unit.
If it is safe to do so, extinguish the fire with a wet
towel. Note that water may damage the machine.
Extinguish the fire with a fire extinguisher. Note that
re extinguishers may cause damage to the machine.
If the fire cannot be extinguished or if it spreads
outside the machine, call your local emergency number
Smoke and Fume Safety
When exhausting outdoors, be sure that the exhaust
location won’t be bothersome to neighbors or passers-by,
and don’t forget to check local air quality regulations that
may apply.
If a strong, sharp smell that also causes eyes, nose,
or throat irritation, is detected, or visible smoke escaping
while the lid is closed, stop immediately and re-check your
exhaust setup.
To Next Page
Loading...
Need help?
General
