Page 35
Flymaster Live C User Manual
Available data fields
A.OverGoal Altitude over goal is the difference between the current altitude and the
goal's altitude based on barometric pressure values.
Above Toff Altitude above takeoff is the altitude over the flight starting point.
Abs.Pressure Absolute atmospheric pressure value in Pascals.
Active waypoint Active turnpoint name.
AGL Altitude above ground current location, using GPS altitude as reference.
Alt.Gain Altitude Gain. Altitude gained in current thermal.
Alt.Gain/Loss Altitude Gain/Loss. When at the top of the thermal displays the altitude
gained from the base of the thermal, else displays the altitude lost since reaching the top
of thermal.
Alt.to CTR Altitude to CTR shows altitude to controlled airspace, a negative number
indicates we must sink to come out of controlled airspace.
Altitude Current altitude. This altitude is calculated based on the barometric pressure
and depends on the QNH value.
Altitude2 Second Altimeter which can be set independently to the main altimeter.
Arrival Goal Estimated arrival height above Goal. The height is calculated
considering the average glide ratio that has being made. This means that wind, day quality
and glider performance are used in the calculations.
Arrival Next Estimated arrival height above the next waypoint. This means that
wind, day quality and glider performance are used in the calculations.
Ave.Speed Average ground speed calculated using a filter to show a smoothed
speed, eliminating erratic speed changes due to glider pitching, etc.
Ave.Vario Average Vario calculated using an integration time constant in order to
indicate smoother climbing rates.
To Next Page
Loading...
