FlySky FS-ST8 - Timer Settings; Switches Settings; Firmware Update

9
6. Function menu
In this transmitter, we have classi󽗉ed the functions and made a new layout. There are 4 categories in icons in total.
That is: TX SET(Transmitter Settings), RX SET(Receiver Settings), MDL SET(Model menu), GENER MENU(General
menu). After the classi󽗉cation, it will become more convenient and easy to set up the model
The next-level menu may vary with di󽗈erent model type, and lists below:
For DELTA-WING: CONDITIONS, RATE/CURVE, THROTTLE CURVE, THROTTLE HOLD and DELTA-WING MIX;
For FIXED-WING: CONDITIONS, RATE/CURVE, THROTTLE CURVE, THROTTLE HOLD and V-TAIL;
For MULTICOPTER: CONDITIONS, RATE/CURVE, THROTTLE CURVE and THROTTLE HOLD;
For ENGINEERING VEHICLE: CONDITIONS, RATE/CURVE, THROTTLE CURVE, THROTTLE HOLD and TRACK MIX;
For ROBOT: CONDITIONS, RATE/CURVE, THROTTLE CURVE, THROTTLE HOLD and TRACK MIX;
For GLIDERS: CONDITIONS, RATE/CURVE, THROTTLE CURVE, THROTTLE HOLD and V-TAIL;
For HELICOPTERS: CONDITIONS, RATE/CURVE, THROTTLE CURVE, THROTTLE HOLD, PITCH CURVE, HELI PITCH
SETUP and GYROSCROPE;
For BOAT: CONDITIONS, RATE/CURVE, THROTTLE CURVE and THROTTLE HOLD;
For CAR: CONDITIONS, RATE/CURVE, THROTTLE CURVE and THROTTLE HOLD.
Function settings:
Inthemaininterface,pressMENUtoenterthefunctionmenu.SelectthefunctioncategorybyscrollingScroll Wheel.
PressScroll Wheel toenterthecorrespondingnext-levelmenu.