Focus IMPULSE EVO PEDELEC - Adjusting the Saddle Height

Original User Guide | Impulse Evo pedelec Version 2 US-21
If, in spite of carefully adjusting the saddle height, tilt and
fore-and-aft position, your saddle is still uncomfortable, you
mayneedadierentsaddledesign.Saddles,likepeople,
comeinmanydierentshapes,sizesandresilience.Your
dealer can help you select a saddle which, when correctly
adjusted for your body and riding style, will be comfortable.
Riding with an improperly tightened seat post can allow the
saddle to turn or move and cause you to lose control and
fall. Therefore:
» Ask your dealer to help you make sure you know how to
correctly clamp your seat post.
» Understand and apply the correct technique for
clamping your seat post.
» Beforeyouridethebike,rstcheckthattheseatpostis
securely clamped.
3.2.1 Adjusting the saddle height
1. Sit on the pedelec and at the same time lean
against a wall.
2. Turn the pedal crank on the side away
from the wall to its lowest point.
3. Put your heel on the pedal.
Your leg should be fully extended.
4. Raise the saddle if your leg is not fully
extended when your heel is on the pedal.
Lower the saddle if you cannot reach
the pedals.
WARNING
Mark on the seat post
minimum
insertion
There is a mark on the saddle post showing
the maximum amount you can pull the
saddle post out of the frame. Never pull out
the saddle post beyond this mark, otherwise
itcanbuckleorbreakandyoucouldfallo.
For3. Stretch out leg