Focus IMPULSE EVO PEDELEC - Wheel Circumference

US-62 Original User Guide | Impulse Evo pedelec Version 2
You have the choice between:
Normal quieter quieter-short o
2. Use the / buttons to select the desired option. The selection is
highlighted in black. At the same time, an acoustic signal alerts you of
changes in the future.
3. Whenyouconrmtheacousticsignalwith
, you return to sub-menu 2.
6.4.2.12 Wheel circumference
Path: Settings | Device settings | Drive | Wheel circumference
Ask your dealer for the wheel circumference.
1. In the main menu, navigate to the option "Wheel circumference" as
described under  6.4.1 Configuring settings in the main menu, Page
US-55 :
You can choose between:
» 1,510 mm to 2,330 mm
2. Use the
/ buttons to select the desired options. The selected
option is displayed on a black background.
3. Ifyouhaveconrmedthewheelcircumferencewith
, you will return
to sub-menu level 2.
6.4.2.10 Impulse Evo (Smart) Display: Parking light
Path: Settings | Device settings | Display | Parking light
In this menu item you can set how long the parking light on the pedelec
shouldstayonafterthesystemhasbeenturnedo.
1. Navigate as described in  6.4.1 Configuring settings in the main menu,
Page US-55,underthe“Parkinglight”.
You have the choice between:
O 15s 30s 45s 60s
2. Use the / buttons to select the desired option. The selection is then
displayed on a black background.
3. Conrmbybrieypressing
. You will return to sub-menu 1.
6.4.2.11 Impulse Evo (Smart) Display: Navigation
indicator sound
Path: Settings | Device settings | Display | Navigation indicator sound
If you want to set whether you want to be alerted by a beep when leaving
the navigation path, follow these steps:
1. Navigate as described in  6.4.1 Configuring settings in the main menu,
Page US-55tothemenuitem“Navigationindicatorsound”.