US-8 Original User Guide | Impulse Evo pedelec Version 2
Type Number Characteristics
Sidereector
a) or b)
a)Retroreective
tire sidewalls
2 per
wheel
On each side of the wheel
b)Reector 1 per
wheel
Frontsidereector:colorlessoramber
on the front wheel
Rearsidereector:colorlessorredon
the rear wheel
Shall be visible on each side of the
wheel
On the spokes of each wheel
IV.II Lighting
In Germany the requirements for lighting on bikes is regulated in Section
67oftheRoadTracLicensingRegulation(StVZO)andintheTechnical
Requirements for vehicle parts. Lighting includes both battery and
dynamo-powered lights.
Light type Number Position Characteristics
Front light 1 Front White light
The illuminance must be at least 10 lux at
the center of the beam at a distance of 10
meters.
Rear light 1 Back Red light
The lowest point of the illuminating surface
must not be lower than 9.75 inches above
the road surface.
A standlight function is also permitted
IV.I Reectors
Bikesshallbeequippedwithreectivedevicestopermitrecognitionand
identicationunderilluminationfrommotorvehicleheadlamps.Inthe
USA,therequirementsforreectorsareregulatedinthe“16CFR1512.16
-Requirementsforreectors”.Thefollowingtableprovidesanoverviewof
therequiredreectors,aswellasasmallselectionofcharacteristicswhich
thesereectorsshouldhave.Foradditionalinformation,pleasesee“16
CFR1512.16-Requirementsforreectors”.
Type Number Characteristics
Frontreector 1 Colorless
Front-facing
Theopticalaxisofthereectorshall
be directed forward within 5° of the
horizontal-vertical alignment of the
bike when the wheels are tracking in a
straight line.
Rearreector 1 Red light
Rear-facing
Theopticalaxisofthereectorshall
be directed rearward within 5° of the
horizontal-vertical alignment of the
bicycle when the wheels are traveling
in a straight line.
Pedalreector 2 per pedal Colorless or amber
Front and rear surfaces of the pedal