US-42 Original User Guide | Impulse Evo pedelec Version 2
5. Operations guide
5.1 Charging the battery
If you only want to go for a quick test run, you do not need
to charge the battery completely. You should definitely
charge it before the first long trip 8.3.1 Charging the
battery, Page US-80, because for technical reasons, the
battery is supplied only partially charged– (approximately
50%).
NOTICE
Perform a 'learning cycle': You should completely run down a new,
fully charged battery once until the assistance stops and without
recharging it in between. In that way the battery 'learns' its capacity,
and the actual capacity will agree with the level indicated on the
battery status display. As soon as the battery enters Sleep mode,
press the battery button for 1 second. Then the learn cycle can be
continued. Please perform a learning cycle every six months or 3100
miles. If you do not repeat this from time to time, the actual capacity
of the battery will increasingly diverge from the value on the battery
status display.
5.2 Inserting and locking the battery
NOTICE
Graspthebatteryrmly, so that it does not fall out of your hand.
It can be damaged if you drop it.
1. Hold the battery in front of the
dockingstationatangleof80˚,
slightly tilted to the left.
2. Insert the battery nibs into recesses
provided.
3. Push the battery forwards and
upwards into the docking station
until the locking mechanism engages.
Hold in front of the docking station
Battery catches
and dents
Battery catches in dents
Insert the battery into the docking
To Next Page
Loading...