Focus IMPULSE EVO PEDELEC - 4 Before Every Trip

US-40 Original User Guide | Impulse Evo pedelec Version 2
Type Characteristics
Wheels Check the condition (damage, foreign bodies), concentricity and
pressures of the tires.
The maximum permissible pressure is marked on the
side of a tire in bar and psi (pounds per square inch).
Check the valves are seated securely.
Visually inspect the rims for damage and wear.
Check that the quick-release skewers / through-axles
(if available) are secured correctly.
Chain or belt Check the chain, belt, pinions and sprockets for wear and
damage.
Brakes Check that the brake system (including brake levers) is working
and attached correctly and securely.
Visual inspection of the brake pads/disks.
Lights Check that the light system is adjusted and in working order.
Checkthatreectorsareaxedinaccordancewithapplicable
nationaltracregulations.
Threaded joints Checkthatallthreadedjointsaretightenedasspecied.
Luggage Check it is attached securely.
4. Before every trip
WARNING
Have damaged components (tears, cracks etc.) replaced before you
use the bike again. If not, important components may fail, causing you
tofallo.
Do not ride the bike if it is not in a technically satisfactory condition.
Do not ride a bike or component with any crack, bulge or dent, even
a small one. Riding a cracked frame, fork or component could lead to
complete failure, with risk of serious injury or death. If you are not
sure, have it checked out by your dealer.
Inspect your pedelec before every trip, and after each time it has been
transported anywhere or has been left unattended. Use the following
checklist to help you.
Checklist
Type Characteristics
Frame/forks Check the frame and forks for visible warping, cracks and
damage.
Handlebars / front stem Check they are seated securely
Check that the bell is working and attached correctly and
securely.
Saddle / saddle post Check that the quick-release skewers / through-axles (if
available) are secure.