EasyManua.ls Logo

Focus IMPULSE EVO PEDELEC - 9 Impulse E-Bike Navigation App; Technical Requirements

Focus IMPULSE EVO PEDELEC
104 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
US-82 Original User Guide | Impulse Evo pedelec Version 2
8.4 Tips
8.4.1 Cleaning
WARNING
Always unplug the charger from the mains before cleaning and
especially before wiping it, otherwise you could get an electric shock
if you touch the contacts.
NOTICE
Do not immerse the charger in water. You could damage the bike.
Do not use any cleaners containing alcohol, solvents or that have a
scouring action. Nor should you use coarse sponges or brushes; you
will scratch and tarnish the surface. Clean the casing with a soft,
damp cloth.
1. Remove the charging cable from the battery charging socket.
2. Unplug the charger from the power outlet.
3. Clean the casing with a soft, damp cloth.
4. If the contacts are dirty, clean them with a soft dry cloth.
8.4.2 Storage
1. Store the battery charger in a dry, but not too warm place. The battery
charger must not be exposed to direct sunlight. The recommended
storage temperature is between 32°F and 68 °F.
9. Impulse e-bike navigation app
Takealookatourlm:
https://youtu.be/PBwtDXuTzz8
Also read our guide "Impulse E-Bike
navigation: Quick-start app":
http://www.derby-cycle.com/en/downloads/
downloads.html
9.1 Technical requirements
Smartphone operating system iOS ≥7
Android ≥4.3.3

Table of Contents