Focus IMPULSE EVO PEDELEC - Page 81

Original User Guide | Impulse Evo pedelec Version 2 US-81
Type 2 charger
1. Connect power cord to the charger.
2. Remove the protective cap from the battery.
3. Insert the battery into the charger until it clicks into place.
4. Insertthemainsplugintoapoweroutlet.ThegreenLEDashes
steadily
signaling that the charging process has started.
If the battery remains connected, the charger checks at
irregular intervals whether the battery is full. When this
occurs,theLEDonthechargerstartsashingagain.After
checkingandndingthatthebatteryisfullycharged,the
chargerwillswitchbackto"PermanentlyOn”.
5. Thechargerswitchesooncethebatteryisfullycharged.Thegreen
LED is permanently on
.AllveLEDs

on the battery are
permanently on. No LED blinks.
6. Remove the main plug from the power outlet after completing the
charging process.
7. Remove the charging cable from the battery charging socket.
8.3.1.1 Battery display during charging
Display Description Battery charge level

5LEDson,noLEDashes 97 – 100 %

4LEDsonandthe5thLEDashes 80 – 96 %

3LEDsonandthe4thLEDashes 60 – 79 %

2LEDsonandthe3rdLEDashes 40 – 59 %

1LEDonandthe2ndLEDashes 20 – 39 %
1LEDashing 0 – 19 %