Focus IMPULSE EVO PEDELEC - Battery Charger; 12 Torque Settings

Original User Guide | Impulse Evo pedelec Version 2 US-97
11.3 Battery charger
Type 1 charger
Description Cause Remedy
Charger gets
hotter than
185 °F.
Ambient temperature
too high, direct
sunlight
1. Unplug the charger from the mains
immediately and let it cool down.
Unplug the charger from the mains
immediately. Please ask your dealer.
2. Continue the charging process when the
charger has cooled down.
Permitted ambient temperature range
duringcharging:32to104°F.
3. If the problem reoccurs, please ask your
dealer; the charger may have to be replaced.
Damaged charger Please ask your dealer; the charger may have to
be replaced.
Type 2 charger
Display Description Cause Remedy
The red LED
ashes
There is a
charging
fault.
Unplug the charger from the mains
immediately. Please ask your dealer.
12. Torque settings
WARNING
Only use proper tools to tighten screws and bolts. Observe the
speciedtorquesetting.Thecomponentmanufacturer'storque
settings take precedence (where available). Failure to comply can
result in screws/bolts becoming loose, tearing away or fracturing. If
thathappenswhileridingthebike,componentsmaycomeoand
youcouldhaveaseverecrash.Ifxingsareovertightenedother
components can also be damaged. Tighten all safety-relevant screws
and bolts with a torque wrench. This indicates the corresponding
torque in newton meters (Nm) or foot pound [ft·lb].
Correct tightening force on fasteners –nuts, bolts, screws– on your
bike is important. Too little force and the fastener may not hold se-
curely. Too much force and the fastener can strip threads, stretch,
deform or break. Either way, incorrect tightening force can result in
component failure, which can cause you to lose control and fall.
Correctly tightening a fastener requires a calibrated torque wrench.
A professional bike mechanic with a torque wrench should torque the
fasteners on you bike. If you choose to work on your own bike, you
mustuseatorquewrenchandthecorrecttighteningtorquespecica-
tions from the bike or component manufacturer or from your dealer.
Ifyouneedtomakeanadjustmentathomeorintheeld,weurge
you to exercise care, and to have the fasteners you worked on checked
by your dealer as soon as possible.