Original User Guide | Impulse Evo pedelec Version 2 US-69
Drive unit
CAUTION
Do not clean the drive unit while it is still hot (e.g. straight after a
ride).Touching them may cause contact burn injuries. Wait until the
drive unit has cooled down.
1. Remove the drive unit from the pedelec.
2. Clean the outside of the drive unit with a soft, damp cloth.
Display and control unit
1. Clean the outside of the display and drive unit with a soft, damp cloth.
6.5.4 Storage
1. Remove the battery from the pedelec.
2. Store the battery in a dry, but not too warm place. The battery
must not be exposed to direct sunlight. The recommended storage
temperature is 65 to 74 °F.
6.5.5 Cleaning
WARNING
Remove the battery from the bike before cleaning. Accidental
activation of the
button may lead to severe injuries.
NOTICE
Do not clean the pedelec and its components with a water hose or high
pressure washer. You could damage the bike. Clean the pedelec with a
soft, damp cloth.
Do not immerse the drive unit and components in water. You could
damage the bike.
Do not use any cleaners containing alcohol, solvents or that have a
scouring action. Nor should you use coarse sponges or brushes; you will
scratch and tarnish the surface. Clean the pedelec with a soft, damp
cloth.
Do not let dirt dry out. Ideally, you should clean the bike
straight after the trip.
To Next Page
Loading...