To Next PageTo Next PageWhy Follett 25CI400A Water Dispenser does not dispense ice?
There are several possible causes: 1. The power switch might be off or faulty. Check the switch, turn it on, or replace it if it’s faulty. 2. The dispense switch might be faulty. If so, replace the switch. 3. The wheel motor might have a malfunction. Check the motor and capacitor, and replace them if needed.
Why Follett 25CI400A Water Dispenser ice machine runs continuously?
The bin stat might be faulty or incorrectly positioned. Check for proper positioning. If the stat does not open when ice is placed on the capillary tube, replace the stat.
What to do if Follett Water Dispenser does not dispense water?
There are several potential reasons: 1. A faulty water solenoid valve. Replace the water solenoid valve. 2. A faulty dispense switch. Replace the dispense switch. 3. The power switch is off or faulty. Check the switch, turn it on, or replace it if faulty.
What to do if Follett 25CI400A Water Dispenser dispense wheel rotates continuously?
The dispense switch contacts are burned out, replace the dispense switch.
General| Brand | Follett |
|---|---|
| Model | 25CI400A |
| Category | Water Dispenser |
| Language | English |
Pre-installation checks and initial steps before setting up the dispenser.
Details for reaching Follett Corporation for support and inquiries.
Dimensional and physical specifications for countertop and wall mount dispenser models.
Power, environmental, and water connection requirements for safe operation.
Required clearances for airflow and unit weight specifications.
Initial setup steps, including uncrating, inspection, and preparation.
Instructions for installing countertop units with rear or bottom utility access.
Procedures for mounting dispensers on walls, including sink requirements.
Schedule for routine cleaning tasks based on frequency: weekly, monthly, semi-annually.
Specific cleaning procedures for weekly and monthly maintenance.
Comprehensive steps for bi-annual cleaning and sanitizing of the ice machine and dispenser.
Overview of ice machine systems, icemaking, and harvesting mechanisms.
Procedures for removing and replacing dispenser components like wheels, motors, and tubes.
Steps for removing the ice machine and servicing its evaporator and related parts.
Instructions for replacing the gearmotor assembly and removing the fan.
Diagrams showing the physical placement of electrical parts within the unit.
Schematics of electrical connections for lever and SensorSAFE dispenser models.
Key information on power sources, signals, and safety during electrical work.
Description of the ice machine's cycle stages during normal ice production.
Explanation of error codes and machine states indicated by diagnostic LEDs.
Visual representation of refrigerant flow through the system components.
Tables detailing ice production rates based on environmental conditions.
Guidelines for refrigerant management, replacement, and system evacuation.
Guides for diagnosing and resolving common dispenser operational issues.
Comprehensive guide for identifying and correcting ice machine malfunctions.
Illustrated parts breakdown for dispenser exterior, chutes, panels, and electrical box.
Illustrated parts list for water inlet, drain fittings, and valves.
Illustrated parts for evaporator, motors, fans, and electrical components of the ice machine.
