Foscam CGI - Getosdmask; Setosdmask; Getmotiondetectconfig

Foscam IPCamera CGI User Guide
Copyright@ Shenzhen Foscam Intelligent Technology Limited
26
getOSDMask
Function
Get OSD mask status
privilege
admin
Usage
/cgi-bin/CGIProxy.fcgi?cmd=getOSDMask
Param
None
Return
isEnableTimeStamp
Time stamp will display on screen or not
isEnableDevName
Camera name will display on screen or not
dispPos
OSD display position, currently can only be 0
isEnableOSDMask
Is OSD mask effective
Note
Example
/cgi-bin/CGIProxy.fcgi?cmd=getOSDMask&usr=admin&pwd=
setOSDMask
Function
Set OSD mask status
privilege
admin
Usage
/cgi-bin/CGIProxy.fcgi?cmd=setOSDMask
Param
isEnableOSDMask
0-Disable, 1-Enable
Return
None
Note
Example
/cgi-bin/CGIProxy.fcgi?cmd=setOSDMask&isEnableOSDMask=1&usr=admin&p
wd=
getMotionDetectConfig
Function
Get motion detect config
privilege
admin
Usage
/cgi-bin/CGIProxy.fcgi?cmd=getMotionDetectConfig
Param
None
Return
isEnable
Is enable motion detect alarm
linkage
Motion alarm linkage
( bit3 | bit2 | bit1 | bit0 )
bit0:Ring
bit1:Send mail
bit2:Snap picture
bit3:Record
snapInterval
The interval time to snap picture again
sensitivity
Motion detect
0 : Low