Foscam CGI - Smtptestnew; Setp2 Penable

Foscam IPCamera CGI User Guide
Copyright@ Shenzhen Foscam Intelligent Technology Limited
74
Return
testResult
0
Success
-1
Fail
Note
Example
/cgi-bin/CGIProxy.fcgi?cmd=smtpTest&
smtpServer
=smtp.gmail.com&port=587
&isNeedAuth=1&user=test&password=test&sender=test@gmail.com&usr=ad
min&pwd=
smtpTestNew
Function
Test mail setting (
Password to support special characters
)
privilege
admin
Usage
/cgi-bin/CGIProxy.fcgi?cmd=smtpTestNew
Param
smtpServer
SMTP server address
port
smtp port
isNeedAuth
Need auth user account or not
tls
0
None
1
TLS
2
STARTTLS
user
user name
password
Encoded password
Eg: if your password is “123&”,you must use “49,50,51,38”
instead it .(Each character must use ASCCI code conversion,
and separated by commas characters)
sender
Send Email address
Return
testResult
0
Success
-1
Fail
Note
Example
/cgi-bin/CGIProxy.fcgi?cmd=smtpTestNew&smtpServer=smtp.gmail.com&port=
587&isNeedAuth=1&user=test&password=49,50,51,38&sender=test@gmail.c
om&usr=admin&pwd=
setP2PEnable
Function
Set p2p status
privilege
admin