Foscam CGI - Openinfraled; Closeinfraled; Getinfraledconfig

Foscam IPCamera CGI User Guide
Copyright@ Shenzhen Foscam Intelligent Technology Limited
81
minute
sec
Note
This command can only be used to set the third party ddns
Example
/cgi-bin/CGIProxy.fcgi?cmd=getSystemTime&usr=admin&pwd=
openInfraLed
Function
Force open infra led
privilege
admin
Usage
/cgi-bin/CGIProxy.fcgi?cmd=openInfraLed
Param
None
Return
ctrlResult
0
Success
-1
Fail
Note
Example
/cgi-bin/CGIProxy.fcgi?cmd=openInfraLed&usr=admin&pwd=
closeInfraLed
Function
Force close infra led
privilege
admin
Usage
/cgi-bin/CGIProxy.fcgi?cmd=closeInfraLed
Param
None
Return
ctrlResult
0
Success
-1
Fail
Note
Example
/cgi-bin/CGIProxy.fcgi?cmd=closeInfraLed&usr=admin&pwd=
getInfraLedConfig
Function
Get infra led config
privilege
admin
Usage
/cgi-bin/CGIProxy.fcgi?cmd=getInfraLedConfig
Param
None
Return
mode
0
Auto mode
1
Manual mode
Note
Example
/cgi-bin/CGIProxy.fcgi?cmd=getInfraLedConfig&usr=admin&pwd=