Foscam CGI - UPnP, PPPoE, and ONVIF Settings

Foscam IPCamera CGI User Guide
Copyright@ Shenzhen Foscam Intelligent Technology Limited
76
Example
/cgi-bin/CGIProxy.fcgi?cmd=getP2PPort&usr=admin&pwd=
getP2PInfo
Function
Get p2p UID
privilege
admin
Usage
/cgi-bin/CGIProxy.fcgi?cmd=getP2PInfo
Param
None
Return
uid
P2P UID
Note
Example
/cgi-bin/CGIProxy.fcgi?cmd=getP2PInfo&usr=admin&pwd=
getPPPoEConfig
Function
Get PPPoE config
privilege
admin
Usage
/cgi-bin/CGIProxy.fcgi?cmd=getPPPoEConfig
Param
None
Return
isEnable
is Enable PPPoE function
userName
userName
password
password
Note
Example
/cgi-bin/CGIProxy.fcgi?cmd=getPPPoEConfig&usr=admin&pwd=
setPPPoEConfig
Function
Set PPPoE config
privilege
admin
Usage
/cgi-bin/CGIProxy.fcgi?cmd=setPPPoEConfig
Param
isEnable
is Enable PPPoE function
userName
userName
password
password
Return
None
Note
Example
/cgi-bin/CGIProxy.fcgi?cmd=setPPPoEConfig&isEnable=1&userName=usr&p
assword=pwd&usr=admin&pwd=