Foscam IPCamera CGI User Guide
Copyright@ Shenzhen Foscam Intelligent Technology Limited
Control mode-0:by time,1:by loop count
/cgi-bin/CGIProxy.fcgi?cmd=setCruiseCtrlMode&
mode
=0&usr=admin&pwd=
getCruiseCtrlMode
Get control mode for continue cruise, by time or count
/cgi-bin/CGIProxy.fcgi?cmd=getCruiseCtrlMode
Control mode-0:by time,1:by loop count
/cgi-bin/CGIProxy.fcgi?cmd=getCruiseCtrlMode&usr=admin&pwd=
setCruisePrePointLingerTime
Set linger time for cruise,when pt arrive prepoint
/cgi-bin/CGIProxy.fcgi?cmd=setCruisePrepointLingerTime
N:[0-7],max number of prepoints in cruise
/cgi-bin/CGIProxy.fcgi?cmd=setCruisePrePointLingerTime&
name
=123&time0=
0&time1=1&time2=2&time3=3&time4=4&time5=5&time6=6&time7=7&usr=ad
min&pwd=
getCruisePrePointLingerTime
Set linger time for cruise,when pt arrive prepoint
/cgi-bin/CGIProxy.fcgi?cmd=getCruisePrepointLingerTime
N:[0-7],max number of prepoints in cruise
/cgi-bin/CGIProxy.fcgi?cmd=getCruisePrePointLingerTime&name=123&usr=a