Foscam CGI - Setrecordpath; Getschedulerecordconfig

Foscam IPCamera CGI User Guide
Copyright@ Shenzhen Foscam Intelligent Technology Limited
35
setRecordPath
Function
Set record path for storage
privilege
admin
Usage
/cgi-bin/CGIProxy.fcgi?cmd=setRecordPath
Param
path
0-SD card，2-FTP server 3-SD card and cloud
Return
setResult
0
success
-1
Sd card is not exist
-2
Share direction is not set
-3
Not enough space
-4
Param error
-5
Param recording
free
The free capacity of storage device
total
The total capacity of storage device
Note
Example
/cgi-bin/CGIProxy.fcgi?cmd=setRecordPath&usr=admin&pwd=&path=2
getScheduleRecordConfig
Function
Get config for schedule recording
privilege
admin
Usage
/cgi-bin/CGIProxy.fcgi?cmd=getScheduleRecordConfig
Param
None
Return
isEnable
Schedule-Record enable status, 0-disable,1-enable
recordLevel
Level for drop frame,0-30/30,1-24/30,2-15/30,3-8/30,
4-4/30,5-1/30;
spaceFullMode
The process method when SD card is full,0-cover the
oldest video and continue record,1-stop record
isEnableAudio
Is recording include audio? 0-no,1-yes
scheduleN
The motion alaram schedule of one week,
N = 0(Monday) ~6(Sunday)
For detail, see *1 bellow
Note
·The min unit of schedule is half an hour, scheduleN value range
1-2
N
(N[0-48])
Example
/cgi-bin/CGIProxy.fcgi?cmd=getScheduleRecordConfig&usr=admin&pwd=