Foscam CGI - Network and Connectivity Settings; IP Address and Wi-Fi Configuration

Foscam IPCamera CGI User Guide
Copyright@ Shenzhen Foscam Intelligent Technology Limited
61
Param
rs485Protocol
Protocol
rs485Addr
Address
rs485Baud
Baud rate
rs485DataBit
DataBit
rs485StopBit
StopBit
rs485Check
Parity
Return
None
Note
Only supported by ipc that can enable 485
Example
/cgi-bin/CGIProxy.fcgi?usr=admin&pwd=&cmd=set485Info&rs485Protocol
=0&rs485Addr=1&rs485Baud=1200&rs485DataBit=7&rs485StopBit=1&rs
485Check=0
get485Info
Function
Get informations of 485
privilege
operator
Usage
/cgi-bin/CGIProxy.fcgi?cmd=get485Info
Param
None
Return
rs485Protocol
Protocol
rs485Addr
Address
rs485Baud
Baud rate
rs485DataBit
DataBit
rs485StopBit
StopBit
rs485Check
Parity
Note
Only supported by ipc that can enable 485
Example
/cgi-bin/CGIProxy.fcgi?usr=admin&pwd=&cmd=get485Info
Network
getIPInfo
Function
Get IP Info
privilege
admin
Usage
/cgi-bin/CGIProxy.fcgi?cmd=getIPInfo
Param
None
Return
isDHCP
Obtain ip from dhcp server or not
ip
ip address(Can only support ipv4 yet)