Foscam CGI - Testftpservernew; Getsmtpconfig

Foscam IPCamera CGI User Guide
Copyright@ Shenzhen Foscam Intelligent Technology Limited
71
tpPort=21&mode=0&fptuserName=test&ftppassword=test&usr=admin&pwd=
testFtpServerNew
Function
Test FTP server (Password to support special characters)
privilege
admin
Usage
/cgi-bin/CGIProxy.fcgi?cmd=testFtpServerNew
Param
ftpAddr
FTP server address, you can contain sub directory in it
ftpPort
FTP port
mode
0
PASV mode
1
PORT mode
fptuserName
user name
ftppassword
Encoded password
Eg: if your password is “123&”,you must use “49,50,51,38”
instead it .(Each character must use ASCCI code conversion,
and separated by commas characters)
Return
testResult
0
Success
-1
Fail
Note
Example
/cgi-bin/CGIProxy.fcgi?cmd=testFtpServerNew&ftpAddr=ftp://192.168.1.2/sbu
Dir&ftpPort=21&mode=0&fptuserName=test&ftppassword=49,50,51,38&usr=a
dmin&pwd=
getSMTPConfig
Function
Get mail config
privilege
admin
Usage
/cgi-bin/CGIProxy.fcgi?cmd=getSMTPConfig
Param
None
Return
isEnable
is enable camera send mail?
server
SMTP server address
port
smtp port
isNeedAuth
Need auth user account or not
tls
0
None
1
TLS