Foscam CGI User Manual

Foscam IPCamera CGI User Guide
Copyright@ Shenzhen Foscam Intelligent Technology Limited
62
gate
gateway(“0.0.0.0” when use dhcp)
mask
subnet mask
dns1
The first dns server addr(“0.0.0.0” when use dhcp)
dns2
The second dns server addr(“0.0.0.0” when use dhcp)
Note
Example
/cgi-bin/CGIProxy.fcgi?cmd=getIPInfo&usr=admin&pwd=
setIpInfo
Function
Set IP Info
privilege
admin
Usage
/cgi-bin/CGIProxy.fcgi?cmd=setIpInfo
Param
isDHCP
Obtain ip from dhcp server or not
ip
ip address(Can only support ipv4 yet)
gate
gateway
mask
subnet mask
dns1
The first dns server addr
dns2
The second dns server addr
Return
None
Note
System will reboot automatically to take effect after call this CGI command
Example
/cgi-bin/CGIProxy.fcgi?cmd=setIpInfo&isDHCP=0&ip=192.168.1.88&gate=192
.168.1.1&mask=255.255.255.0&dns1=192.168.1.1&dns2=192.168.1.1&usr=a
dmin&pwd=
refreshWifiList
Function
Start scan the aps around
privilege
admin
Usage
/cgi-bin/CGIProxy.fcgi?cmd=refreshWifiList
Param
None
Return
None
Note
This operation may takes a while, about 20 seconds or above, the other
operation on this device will be blocked during the period.
Example
/cgi-bin/CGIProxy.fcgi?cmd=refreshWifiList&usr=admin&pwd=

Foscam CGI Specifications

General

Brand	Foscam
Model	CGI
Category	IP Camera
Language	English