Foscam CGI - Getalarmrecordconfig; Setalarmrecordconfig; Getrecordpath

Foscam IPCamera CGI User Guide
Copyright@ Shenzhen Foscam Intelligent Technology Limited
34
getAlarmRecordConfig
Function
Get alarm record config
privilege
admin
Usage
/cgi-bin/CGIProxy.fcgi?cmd=getAlarmRecordConfig
Param
None
Return
isEnablePreRecord
Preview record state
preRecordSecs
Preview record time
alarmRecordSecs
Alarm record time
Note
Example
/cgi-bin/CGIProxy.fcgi?cmd=getAlarmRecordConfig&usr=admin&pwd=
setAlarmRecordConfig
Function
Set alarm record config
privilege
admin
Usage
/cgi-bin/CGIProxy.fcgi?cmd=setAlarmRecordConfig
Param
isEnablePreRecord
Preview record state
preRecordSecs
Preview record time
alarmRecordSecs
Alarm record time
Return
Set result(0-success,-1-error)
Note
Example
/cgi-bin/CGIProxy.fcgi?cmd=setAlarmRecordConfig&usr=admin&pwd=&isEnabl
ePreRecord=1&preRecordSecs=5&alarmRecordSecs=30
getRecordPath
Function
Get record path for storage
privilege
admin
Usage
/cgi-bin/CGIProxy.fcgi?cmd=getRecordPath
Param
None
Return
path
0-SD card，2-FTP server
free
The free capacity of storage device
total
The total capacity of storage device
Note
Example
/cgi-bin/CGIProxy.fcgi?cmd=getRecordPath&usr=admin&pwd=