Foscam CGI User Manual

Foscam IPCamera CGI User Guide
Copyright@ Shenzhen Foscam Intelligent Technology Limited
73
Param
isEnable
is enable camera send mail?
server
SMTP server address
port
smtp port
isNeedAuth
Need auth user account or not
tls
0
None
1
TLS
2
STARTTLS
user
user name
password
Encoded password
Eg: if your password is “123&”,you must use “49,50,51,38”
instead it .(Each character must use ASCCI code conversion,
and separated by commas characters)
sender
reciever
Use “,” between 2 senders, for exapler:
aaa@123.com,bbb@456.com
Return
None
Note
Example
/cgi-bin/CGIProxy.fcgi?cmd=setSMTPConfigNew&isEnable=1&server=smtp.g
mail.com&port=587&isNeedAuth=1&user=test&password=49,50,51,38&send=
test@gmail.com&reciever=aa@123.com,bb@456.com&usr=admin&pwd=
smtpTest
Function
Test mail setting
privilege
admin
Usage
/cgi-bin/CGIProxy.fcgi?cmd=smtpTest
Param
smtpServer
SMTP server address
port
smtp port
isNeedAuth
Need auth user account or not
tls
0
None
1
TLS
2
STARTTLS
user
user name
password
password
sender
Send Email address

Foscam CGI Specifications

General

Brand	Foscam
Model	CGI
Category	IP Camera
Language	English