Fox Thermal FT3 - Page 71

Pressing YES (F1) will show:
F1 F2 F3 F4
Enter the value and then press OK (F4).
NOTE! Enter zero to disable this feature.
The screen will show:
F1 F2 F3 F4
Pressing YES (F1) will show:
F1 F2 F3 F4
Enter the value and then press OK (F4).
NOTE! Enter zero to disable this feature.
The screen will show:
F1 F2 F3 F4
Pressing YES (F1) will show:
F1 F2 F3 F4
Enter the value and then press OK (F4).
NOTE! This value is used to simulate the Current Sense Voltage (CSV) and should be set to
zero for normal mode.
FloSim = 0 SCFM
CHG OK
SIMULATE TEMP?
YES NO
TmpSim = 0 C
CHG OK
SIMULATE CSV?
YES NO
CsvSim = 0 V
CHG OK
Operation | 71
Model FT3
Operation