Maintenance and care
75
Cleaning
• Moisten a lint free cloth with demineralised
water.
You can also use distilled water or normal tap
water if demineralised water is not at hand.
The minerals contained in tap water could,
however, leave residues in the print head.
For best cleaning results, use FP contact
cleaner and cleaning cloths contained in the
‘clean & renew’ cleaning kit offered by Fran-
cotyp-Postalia.
• Hold the cartridge as shown in the picture.
The nozzles must point downwards
!
• Slowly and carefully wipe the print head
with the cloth in the direction of the arrow.
Repeat this action several times.
The water will blend with ink residues and
clean the nozzles.
• Reinsert the ink cartridge (see page 69).
• Lower the operating panel back into posi-
tion.
• Align the ink cartridge (see chapter 12.4,
page 71).
To Next Page
Loading...
