freightliner Sprinter 2015 - Page 103

Example (halogen headlamps)
;
Low-beam headlamp bulb holder
=
Bulb holder for high-beam headlamp
?
Bulb holder for parking lamp/standing
lamp (halogen headlamps)
X
Turn the corresponding bulb holder with
bulb ;, = or ? counter-clockwise and
pull it out of the lamp.
X
Pull the bulb out of the bulb holder.
X
Insert the new bulb in such a way that its
base fits into the recess of the bulb holder.
X
Insert the bulb holder with the bulb into the
lamp and turn it clockwise to tighten.
The bulb holder engages audibly.
X
Place housing cover : into the opening
and turn in the opposite direction of the
arrow.
X
Close the hood.
Cornering light function/daytime run-
ning lamps
X
Switch off the lighting system.
X
Open the hood (Y page 248).
X
Turn housing cover : counter-clockwise
and remove.
X
Bi-Xenon headlamps: turn bulb holder
with bulb ; counter-clockwise and
remove it.
Halogen headlamps: press the spring
catches of the bulb holder together and
remove the bulb holder with bulb ;.
X
Pull the bulb out of the bulb holder.
X
Press a new bulb into the bulb holder.
X
Bi-Xenon headlamps: insert the bulb
holder with bulb ; into the lamp and turn
clockwise.
Halogen headlamps: insert the bulb
holder with bulb ; into the lamp.
The bulb holder with bulb ; engages audi-
bly.
X
Replace cap : and turn it clockwise to the
stop.
The cap audibly engages.
X
Close the hood (Y page 249).
Changing bulbs
101
Lights and windshield wipers
Z