Resetting the side windows
You must reset the side windows if there has
been a malfunction or an interruption in the
voltage supply.
X
Turn the key to position 2 in the ignition
lock.
X
Pull the two power window switches and
hold for approximately 1 second after clos-
ing the side window.
Problems with the side windows
If you cannot completely open or close a side
window:
If there are no objects or leaves in the window
guide that prevent the sliding sunroof from
closing, there has been a malfunction or the
on-board voltage has been interrupted.
X
Reset the side window (Y page 79).
Side windows
79
Opening and closing
Z
To Next Page
Loading...
